Showing posts with label Stephen Salter. Show all posts
Showing posts with label Stephen Salter. Show all posts

Friday, February 23, 2024

Stephen Salter, a giant in combating climate change passes away

   Stephen Salter (2012)
Stephen Hugh Salter, MBE, FRSE, Emeritus Professor of Engineering Design at the University of Edinburgh, was born December 7, 1938, and passed away peacefully on February 23, 2024, at the age of 85.

Stephen Salter was a giant who persisted to dedicate his life to combating climate change, and he did so in many ways until the very end. 

Stephen's work on wave energy led to Salter's Duck (1974), a device able to both generate energy and reduce wave strength. In 1977, Stephen built a multi-directional wave tank at the University of Edinburgh. 

In 2011, Stephen looked at ways to capture methane released in the Arctic, such as by covering lakes and parts of seas by sheets to collect the methane (drawing below).

Empty and filled extruded rubber trough cases with 4 times enlarged views of end and centre

Stephen was perhaps best known for his work on marine cloud brightening, i.e. deploying vessels to spray salt particles into the air in an effort to reduce sea surface temperatures, and thus also reducing sea ice loss and reducing the strength of extreme weather events including storms and hurricanes.

In the video below, Stephen discusses marine cloud brightening in a TEDx talk in 2016. 


Marine cloud brightening | Prof. Stephen Salter | TEDx Talks Published 15 Nov 2016

The image below is from the post Hurricane Moderation at Arctic-news.blogspot.com


In the video below, by theedinburghreporter, Stephen Salter talks about marine cloud brightening.


In the video below, Stephen Salter is interviewed by Nick Breeze (2022). 


Below is a screenshot from the above video by Nick Breeze. 

Stephen Salter discusses sending solar energy back out to space by means of Marine Cloud Brightening.
Screenshot by Sam Carana from video by Nick Breeze.

Stephen Salter (2022): "A jolly small change in reflectivity of the clouds will be sending solar energy back out to space enough to balance what the excess is that's being retained here by greenhouse gases (4:26-4:41). Maybe 10 cubic meters of water a second as sub micron drops sprayed in the right place would offset all the damage we've done since pre-industrial times (5:15-5:24)." 

Our hearts are saddened by this huge loss, and our thoughts are with Stephen's family and his many friends. Stephen's work will not be forgotten.


Links

• Futuristic fleet of 'cloudseeders' - by John Latham (2007)
https://news.bbc.co.uk/2/hi/programmes/6354759.stm

• Sea-going hardware for the cloud albedo method of reversing global warming - by Stephen Salter, Graham Sortino and John Latham (2008)
https://royalsocietypublishing.org/doi/10.1098/rsta.2008.0136

• Can we capture methane from the Arctic seabed? (2011)

• Professor Stephen Salter receives top Academy Award (2012)

• Leading wave energy pioneer Prof Stephen Salter (2012) 
https://www.theengineer.co.uk/content/in-depth/leading-wave-energy-pioneer-prof-stephen-salter

• Coded modulation of computer climate models for the prediction of precipitation and other side-effects of marine cloud brightening (2013)

• Marine cloud brightening | Prof. Stephen Salter | TEDxHeriotWattUniversity |  TEDx talk (2016)
• Hurricane Moderation (2018)
https://arctic-news.blogspot.com/2018/09/hurricane-moderation.html

• Talking to Professor Stephen Salter - TheEdinburghReporter (May 23, 2019)

• Speaking with Professor Stephen Salter - The Edinburgh Report (June 1, 2019)

• Professor Stephen Salter at Holyrood speaking about project to arrest climate change

• John Latham obituary (2021)
https://www.theguardian.com/science/2021/may/30/john-latham-obituay

• Stephen Salter - Whole interview by Nick Breeze ClimateGenn (2022)



Saturday, September 15, 2018

Hurricane Moderation


Hurricane Moderation

By Stephen Salter

The formation of a hurricane depends on many factors, including atmospheric water vapour, distance from the equator and the recent history of wind patterns. But an essential requirement is a high sea surface temperature. To get from a tropical storm to the lowest category of hurricane requires a temperature of 26.5°C. We can moderate hurricanes, or even prevent them, by reducing water temperature.

A useful start to any engineering project is the estimation of all the energy flows. One cubic metre of air at a temperature of 30°C can hold about 30 grams of water vapour. The energy to evaporate this is about the same as in 13 grams of TNT, enough for a nasty anti-personnel mine. A cubic kilometre of such air contains the same energy as the Hiroshima bomb. Hurricanes can be hundreds of kilometres in diameter and so contain tens of thousands of Hiroshimas. If you have read this far you will know about the billions of lost dollars and thousands of deaths from this amount of energy.

Most of the hurricanes that reach America (with the exception of Harvey), start on the African side of the Atlantic near Cape Verde and grow as they move west. We can use Google Earth to measure the hurricane breeding area. The US National Weather Service gives a warm water depth of 45 metres. To cool this volume by 2°C in 200 days needs more than 600 times the mean US electricity power generation. If you want to moderate a hurricane tomorrow, today is much too late. You should have started last November.

All this heat has come from the sun. Some could be reflected back out to space by clouds. The reflectivity of clouds was studied by Sean Twomey. He flew over many clouds, scooped samples and measured the solar energy reflected from their tops. He showed that reflectivity depends on the size distribution of drops. Lots of small drops reflect more than the same amount of liquid water in fewer, larger ones. In typical conditions, doubling the cloud drop number increases reflectivity by a bit over 0.05.

Making cloud drops needs a high humidity but also some kind of ‘seed’ called a condensation nucleus on which to start growth. There are thousands of condensation nuclei per cubic centimetre of air over land but fewer in air over mid ocean, often less than 50. John Latham suggested that the salt residues left from the evaporation of a spray of sub-micron drops of sea water would be excellent condensation nuclei. They would be moved from the sea surface by turbulence to produce a fairly even distribution upwards through the marine boundary layer to where clouds form.


The condensation nuclei could be produced by wind-driven sailing vessels cruising along the hurricane breeding areas getting energy from their motion through the water. We can make spray by pumping water through very small nozzles etched in the silicon wafers used for making microchips. The main technical problem is that sea water is full of plankton much larger than nozzles. This can be filtered using ultra-filtration technology with back-flushing, originally developed for removing polio viruses from drinking water. Each vessel would produce 0.8 micron diameter drops at 1017 a second.

[ part-image from larger Wikipedia map ]
Spray operations would depend on the pattern of sea surface temperatures as measured by satellites. We want the trajectory of temperature rises through the year from November to the following July to be those that an international panel of meteorologists think will give a desirable rainfall pattern from ‘gentle’ tropical storms.

Most ships are made in quite small numbers. An exception was the Flower class corvettes built for the Royal Navy during World War II. If we index-link the 1940 cost to today we can predict that in mass production each spray vessel would cost $4 million. With assumptions which have not yet been rejected by hurricane experts, we think that controlling the Atlantic hurricane breeding paths would need about 100 vessels. With typical ship lifetime the annual ownership and maintenance cost would be about $40 million. If these figures and recent estimates of the cost of hurricane damage are correct the benefit-to-cost ratio is quite attractive.

Because of official UK Government policy updated in May 2018 the project is privately funded.


Marine cloud brightening | Prof. Stephen Salter | TEDx Talks Published 15 Nov 2016


Rising temperatures are increasing the amount of water vapor in the atmosphere at a rate of 7% more water vapor for every 1°C warming. This is further speeding up warming, since water vapor is a potent greenhouse gas. Over the coming years, a huge amount of additional water vapor threatens to enter the atmosphere, due to the warming caused by albedo changes in the Arctic, methane releases from the seafloor, etc., as described at this page.

The situation is dire and calls for comprehensive and effective action, as described at the Climate Plan.

Added below is a box from an earlier post with hurricane damage mitigation proposals.


Hurricane Damage Mitigation

A 2014 study by scientists led by Mark Jacobson calculates that large turbine arrays (300+ GW installed capacity) could diminish peak near-surface hurricane wind speeds by 25–41 m/s−1 (56–92 mph) and storm surge by 6–79% AND provide year-round clean and renewable electricity.

How many electric cars will be ready to move into Miami to provide emergency support in the wake of Hurricane Irma?

Storms can cause power outages, electricity poles can get damaged. Electricity poles can also be a traffic hazard (i.e. collisions can occur even if the pole hasn't fallen down, especially when streetlights fail). When damaged, power lines hanging off poles constitute electrical shock hazards and they can cause fires to ignite and wildfires to start.

Storms can also cause damage to backup generators and to fuel storage tanks, making it hard for emergency services to give the necessary support. Electric cars can supply electricity where needed, e.g. to power necessary air conditioning, autoclave and emergency equipment, such as in hospitals. After a tsunami hit Japan in 2011, electric cars moved in to provide electricity from their batteries, as described in many articles such as this one.

Wind turbines and solar panels are pretty robust. Hurricane Harvey hit the Papalote Creek Wind Farm near Corpus Christi, Texas. The wind farm had little or no damage, there was just a short delay in restarting, mostly due to damage to power lines. The Tesla roof that doubles as solar panels is much stronger than standard roofs. Have a look at this video.

Join the Renewables group at facebook!
Clean and renewable energy can provide more stable, robust and safe electricity in many ways. Centralized power plants are vulnerable, in that all eggs are in one basket, while there can be long supply and delivery lines. Many of the benefits of clean and renewable energy are mentioned on above image.

Furthermore, there are ways to lower sea surface temperatures. The image on the right shows the very high sea surface temperature anomalies on August 28, 2017.

Note the colder area (blue) in the Gulf of Mexico. Hurricane Harvey cooled the sea surface as water evaporated and warm moisture was added to the atmosphere. The cyclonic force also mixed colder water below the surface with warmer water at the surface, resulting in colder water at the surface. The combination image below shows the difference between August 20, 2017, and August 30, 2017.

[ click on images to enlarge ]

A number of geoengineering methods can be used to reduce sea surface temperatures and thus reduce the intensity of hurricanes. Methods include upwelling associated with ocean fertilization and with ocean tunnels, marine cloud brightening and increasing and brightening bubbles in the wake of vessels, as discussed at the geoengineering group at facebook.

Besides cooling the sea surface, there's also the upwelling of nutrients that can help combat ocean stratification. Warm water holds less oxygen than cold water. As the water warms, it also tends to form a layer at the surface that does not mix well with cooler, nutrient-rich water below, depriving phytoplankton of some of the nutrients needed in order for phytoplankton to grow (and take up carbon).

Some of these methods are also discussed at this 2011 page, which also mentions that more research is needed into the impact of such methods. Of course, possible application should go hand in hand with dramatic reductions in emissions including a rapid shift to 100% clean and renewable energy.

thesolutionsproject.org
Similarly, the necessary shift to clean and renewable energy in itself will not be enough to avoid catastrophic warming, and it should go hand in hand with further lines of action to remove pollution and to cool the Arctic Ocean, as described at the Climate Plan.


Links

• Climate Plan
https://arctic-news.blogspot.com/p/climateplan.html

• How much warming did and could people cause?
https://arctic-news.blogspot.com/p/how-much-warming-did.html

• AccuWeather predicts economic cost of Harvey, Irma to be $290 billion
https://www.accuweather.com/en/weather-news/accuweather-predicts-economic-cost-of-harvey-irma-to-be-290-billion/70002686

• After Disaster Hit Japan, Electric Cars Stepped Up
http://www.nytimes.com/2011/05/08/automobiles/08JAPAN.html

• In Big Test of Wind Farm Durability, Texas Facility Quickly Restarts After Harvey
https://www.wsj.com/articles/texas-wind-farm-back-online-1504294083

• Tesla Unveils Powerwall 2 & Solar Roof
https://www.youtube.com/watch?time_continue=802&v=4sfwDyiPTdU&fref=gc&dti=2372679678

• Taming hurricanes with arrays of offshore wind turbines, by Mark Z. Jacobson et al. (2014)
https://www.nature.com/nclimate/journal/v4/n3/full/nclimate2120.html

• The Solutions Project
http://thesolutionsproject.org

• Weakening of hurricanes via marine cloud brightening (MCB), by John Latham, Ben Parkes, Alan Gadian, Stephen Salter (2012)
https://onlinelibrary.wiley.com/doi/10.1002/asl.402/abstract

• Engineering Ideas for Brighter Clouds, by Stephen H. Salter, Thomas Stevenson and Andreas Tsiamis  (2014)
https://pubs.rsc.org/en/Content/Chapter/9781782621225-00131/978-1-78262-122-5

• Multiple Benefits Of Ocean Tunnels
https://arctic-news.blogspot.com/2015/02/multiple-benefits-of-ocean-tunnels.html

• Oxygenating the Arctic
https://arctic-news.blogspot.com/p/oxygenating-arctic.html

• Reducing hurricane intensity using arrays of Atmocean Inc.'s wave-driven upwelling pumps
https://www.youtube.com/watch?v=xlnR_GMNIGA

• Could bright, foamy wakes from ocean ships combat global warming?
https://www.sciencemag.org/news/2016/01/could-bright-foamy-wakes-ocean-ships-combat-global-warming


Saturday, September 3, 2016

Action must be taken now


Some of the world's most preeminent climate scientists, all experts with many decades of experience in their respective field, are warning that effective action must be taken now to avoid catastrophe.

These scientists, and many others, have made valuable and much-appreciated contributions to the Arctic-news blog over the years [note: contributors each express their own views in posts and may or may not endorse other content of this blog].

Sam Carana, editor of this blog, has for years supported the calls of these scientists, also discussing and sharing their calls at facebook groups such as Arctic-News, Electric TransportRenewables and Climate Alert.

[ image discussed at facebook ]

Furthermore, Sam Carana has called for specific action for years, including support for biochar, preferably through feebates. More specifically, Sam Carana recommends that revenues raised from fees imposed on sales of livestock products, nitrogen fertilizers and Portland cement are used to fund support for soil supplements, as illustrated by above image. For more on biochar, see this blog and this facebook group.

For years, Sam Carana has also called for more R&D in specific areas of geo-engineering. For more on this, see this blog and this facebook group.

More generally, Sam Carana advocates the Climate Plan, which calls for a global commitment to parallel lines of action while seeking to delegate implementation to local communities, preferably through effective policies such as local feebates.

This blog has had some success in spreading this message. To date, Sam Carana has received 82,327,368 views at Google plus (see screenshot on the right), while this blog has received 3,255,445 views (see update of views in the panel further on the right).

Your continued support is needed to share this message, so please join one or more of the above-mentioned groups, and share and like the images of this post in emails, on facebook and other social media.

Regarding the urgency to act, the images below give an update on the terrifying situation in the Arctic, where the sea ice is disappearing fast.

The decline of the snow and ice cover in the Arctic goes hand in hand with rising sea surface temperatures that contribute to sea ice getting ever thinner.

The image on the right show Arctic sea ice on September 1, 2016, with thickness in meters.

The warming of the oceans is illustrated by the images below.

The image directly below shows sea surface temperature (left) and anomalies compared to 1981-2011 (right).


The image below also shows sea surface temperature anomalies, this time compared to 1971-2000.


Global warming has hit the Arctic particularly hard over the past 365 days, with anomalies exceeding the top end of the scale over most of the Arctic Ocean, as illustrated by the image below.


The situation is dire and calls for comprehensive and effective action as described at the Climate Plan.

Monday, April 18, 2016

Can we Design Hydrogen-Fuelled Aircraft?

Can we Design Hydrogen-Fuelled Aircraft?

S H Salter, Engineering and Electronics, University of Edinburgh.EH9 3JL.

The collection of temperature measurements by David Travis following the 3-day grounding of all US civilian flights after 9/11 showed the astonishing effect of jet exhaust on the environment. If burning hydrocarbon fuel in the stratosphere ever becomes a criminal offence, the aviation industry will have an interesting problem. A possible solution is the use of hydrogen as a fuel. Is this technically possible?

The Airbus 380 carries 250 tonnes of fuel with a total calorific value of about 1013 joules. Fuel is stowed in wing tanks but this would be a volume of about one eighth of the fuselage. The calorific value per unit mass of hydrogen is about 3.5 times that of jet fuel and so the weight of hydrogen for the same range would be only about 70 tonnes. Unfortunately the ratio of density of jet fuel to un-pressurized hydrogen is about 9000, so the design problem is how to reduce the volume ratio by about 2500. If we compress hydrogen to reduce its volume by a factor of, say, 100 we still have a fuel volume of 25 times the liquid fuel one or 3.2 times the fuselage volume. The cube root of 3.2 is 1.47 so by increasing all three fuselage dimensions by this factor we could have an aircraft with enough volume for all fuel in the fuselage but no passenger space. An increase by a factor of about 1.6 in both diameter and fuselage length would give enough volume for passengers provided they did not feel unhappy about being close to so much hydrogen.

The immediate reaction against the proposal will be triggered by embedded folk memories of the Hindenburg. Any use of hydrogen will need careful public relations. The Hindenburg survival rate was 64%, much better than crashes of modern conventional aircraft. Deaths were caused by jumping not burning. People who stayed aboard until the wreck reached the ground were unharmed. It is likely that the fire started in the fabric dope rather than the hydrogen. Because spilt hydrogen moves rapidly upwards there is much less risk than from a liquid fuel or heavier-than-air gases like butane or propane which regularly cause devastating explosions in boats and buildings. Furthermore the heat radiated by the invisible hydrogen flame is much lower than that from carbon particles in hydrocarbon flames. We can argue that hydrogen is actually safer than jet fuel, petrol and hydrocarbon gases.

We can spend the 180 tonne fuel weight-saving on gas storage bottles in the form of a low-permeability skin surrounded by wound carbon fibres. A helical winding of aluminium sheet with a low diffusion coefficient for hydrogen looks good. It can be made with the linear equivalent of spot welding. The axial stress in a thin-wall tube under pressure is only half the hoop stress, so we can use the gas tubes as fuselage strength-members. Once the fuselage bending moments are known, we can choose the wrap angle of the windings to give the right balance of directional strength. One structure might be a bundle of nine tubes in a hexagonal array with six full of hydrogen and three containing passengers. A cross section is sketched in the figure. Other configurations are being studied.

The smooth stress paths of the gas bottles would be badly disrupted by the conventional design of landing gear. Can we get rid of it? The requirements for processing the variable energy flows from renewable-energy sources have led to the development of new high-pressure oil machines using digital rather than analogue control of machine displacement. These machines have very high conversion efficiencies and very easy interfaces to computers (see http://www.artemisip.com/ ) . The extremely accurate control of very large energy flows allows many new applications. One of these involves replacing the landing gear of large passenger aircraft with a ground vehicle. Please suspend disbelief until you have considered the following facts:
  1. The landing gear of the A380 weighs 20 tonnes, say, 200 passengers. This weight is carried round the world for many hours and then used for only a few minutes on each flight.
  2. The landing gear occupies a substantial volume of the internal space. The volume restriction limits the travel of the landing gear and so increases acceleration forces.
  3. The requirement for openings compromises the structural integrity of the fuselage and adds weight, even more passengers.
  4. Landing gear must perform with very high reliability despite the weight penalty and extreme temperature cycling.
  5. The full weight of the aircraft must be passed to the ground through highly stressed points.
  6. Gas turbines are very inefficient for moving aircraft on the ground at slow speeds.
  7. On the A380 the shape of the landing gear doors and opening spoils the aerodynamic fairness. 
  8. There is a severe design conflict between tyre weight, tyre life and braking performance.
An alternative might be to provide the function of the landing gear by a special-purpose ground vehicle. It would of course have to have VERY reliable links to the aircraft ground approach electronics so as to be in exactly the right place and moving with the right velocity underneath an aircraft on final approach. However there would be no weight, volume or temperature compromises.


The contact between the landing vehicle and the aircraft would be provided by a nest of large air-filled tubes like very large, very soft V-block, running the full length of the fuselage. This would spread the weight evenly into the aircraft skin. The tube surfaces could have vacuum suckers, like an octopus, which could apply shear forces evenly to the aircraft skin. The bags could be on a frame which could have hydraulic actuators to give a much longer travel than the legs of the landing gear. Tilting this frame would remove the need for the angling of the rear underside of the fuselage required to prevent ground contact at V-Rotate. This would further reduce drag during flight. The absence of fuselage penetrations could allow safe water landings for emergency. Runways can have parallel lakes presenting a much lower fire hazard if fuel is spilt. The impact loading on the runway would be much reduced and it might even be possible to revert to grass runways with several parallel operations from any wind direction.

The ground vehicles could use Diesel engines with much higher efficiency at taxi speed than gas turbines. They could have higher acceleration during take off and higher deceleration during landing. The hydraulic transmission would also allow regenerative braking, so the kinetic energy from one landing could be used for the next take-off. All-wheel steering and the option of direct side movement would allow much better use of ground space. The ground vehicle could have many more tyres, which need have no weight or volume compromise to achieve high braking. It could have an air-knife to dry runway surfaces and remove snow. There would be plenty of time to inspect and exchange landing vehicles and they would be in use for a much higher fraction of the time. The landing vehicles could gently lower aircraft on to passive supports at each loading pier and be used for other movements while aircraft were being boarded or serviced.

Images by S H Salter, University of Edinburgh.
The volume of most aircraft wings is much below that of the fuselage and so there is not a strong reason to use gas tubes as structural wing members. However they would offer a way to offset the extra drag of the larger frontal cross-section. From the original work by Prandtl, it has long been known that sucking air from the upper surface of an aerofoil section will reduce the drag by an amount which far offsets the power needed for a suction pump. Schlichting in figure 14.9 of Boundary Layer Theory gives a graph showing a factor of more than two. An objection to suction on wings, where the outer skin is a structural member, is that perforations and slits cause stress concentrations. This should not apply to wing spars made as gas tubes supporting an unstressed skin.

It is important that using fuel does not move the centre of gravity of the aircraft. This happens automatically with fuel stowed in wing tanks. If large quantities of fuel are to be stored in the fuselage it will be necessary to have the centre of pressure of the wings close to the centre of gravity of the fuselage-engine combination. The choice of a ground-based landing vehicle suggests high wings and engine placement above the wing. In theory at least, this will give some advantage from higher air-velocity over the upper wing surface and lower noise transmission to ground level. It is much easier to service and inspect equipment if you do not have to reach above your head. Cranes lifting an engine upwards are much more convenient than forklift trucks working from below. While some change in the architecture of maintenance hangers would be required, high engines accessed from above would by no means be unwelcome to ground crew.

Gas tubes may not be ideal for connections to a low-chord wing and so the longer attachment line of a delta wing, such as used in the Vulcan and Concord and many fighter designs, should be investigated. A flat underside will relax the requirement for precision in yaw during landing. Suction may be able to offset some of the disadvantages of the delta wing as applied to civilian aircraft provided always that they can land safely after a failure of the suction system. A delta wing with a deep thickness and a leading edge made from very strong but transparent material, perhaps poly carbonate, might even allow passengers to sit in the wing enjoying a splendid view if their vertigo allows.

The range of the A 380 is 15,000 kilometres. While this may have been chosen for passenger convenience with the properties of present fuels, it is larger than necessary for trans-Atlantic flights and could allow a further volume reduction. The San Francisco to Sydney distance is only 12000 km and stops in mid Pacific could be very attractive.

Before we waste time on radical new aircraft designs and ground-based landing systems, it is necessary to confirm that burning hydrogen in gas turbines at high altitudes will be a chemically appropriate solution. If we burn hydrogen in ambient air there will be no release of carbon dioxide but there will still be the formation of nitrogen–oxygen compounds collectively known as NOXes. If these are cooled very rapidly, as in the adiabatic expansion of an internal combustion engine, they can be ‘frozen’ at the high-temperature equilibrium state with lots of very nasty acids. The lower combustion pressure and slightly slower cooling of a jet exhaust should be less severe but we want to quantify the severity of the problem. There may even be problems from ice crystals formed from the exhaust. I have asked colleagues at the National Centre for Atmospheric Research at Boulder Colorado for an opinion.

There is one engine design in which the combustion products cool slowly enough for almost all the NOX production to revert to ambient values. This is the Stirling engine originating from 1815 but abandoned because of the absence of materials with good thermal conductivity and high hot strength. Much better materials are now available. By an extraordinary coincidence, the digital hydraulic systems needed for the speed and accuracy of the ground-based landing gear can also radically change the design of Stirling engines by using hydraulics to replace the crank and connecting rods of the conventional Stirling engine. A Stirling-engined aircraft would probably have to use a ducted fan or propeller propulsion but these could still allow civilian aviation to continue in a NOX-sensitive world.

The best way to do experiments on high-altitude engine-chemistry might be from a balloon. Do we know anyone with an interest in this area?

Friday, January 25, 2013

Coded modulation of computer climate models for the prediction of precipitation and other side-effects of marine cloud brightening

by Stephen Salter, University of Edinburgh, and Alan Gadian, University of Leeds.


Background

In 1990 John Latham [1] suggested that the Twomey effect [2] [3] could be used to slow or reverse global warming by increasing the reflectivity of clouds. Reflectivity depends on the size distribution of drops. For the same amount of liquid water a large number of small drops is whiter than a smaller number of big ones. Latham suggested the release of submicron drops of filtered sea water into the marine boundary layer below or near mid-oceanic stratocumulus clouds in regions where the concentration of cloud condensation nuclei is low and cloud drops are large. Evaporation would produce salt residues which are excellent cloud condensation nuclei. Turbulence would disperse them through the marine boundary layer. They would increase the number but reduce the size of drops in the cloud. Twomey suggested that, for many cloud conditions, a doubling of the number of nuclei would increase cloud top reflectivity by about 0.058.

Several independent climate models [4], [5], [6], show that the amount of spray that would be needed to reverse the thermal effects of changes since pre-industrial times is quite small, of the order of 10 cubic metres a second for the whole world. The thermal effects of double preindustrial CO2 concentration would still be manageable. Furthermore the technique intercepts heat flowing from the tropics to the poles and so cools them no matter where the spraying is done. It should therefore be possible to preserve Arctic ice. Local control and rapid response may allow thermal protection of coral reefs. Design of wind-driven vessels and spray equipment is well advanced [7].

The aim of this proposal is to identify and quantify potential side-effects of marine cloud brightening. We want to produce an everywhere-to-everywhere transfer-function of spray quantity with regard to temperature, precipitation, polar ice, snow cover and vegetation using several leading climate models in parallel. This should especially show the times and places at which spraying should NOT be done. The technique involves changing the concentration of condensation nuclei at many spray regions round the world according to coded sequences unique to each region and correlating this sequence with model results at observing stations round the world. A first test on a set of 16 artificial changes with different magnitudes to a real 20-year temperature record showed that the magnitude of each change could be detected to 1% or 2% of the standard deviation. This is better than many thermometers. Confidence has been boosted by the PhD project carried out by Ben Parkes at Leeds who has shown that the effects on precipitation are bi-directional.

The technique may let us steer towards beneficial climate patterns if only the world community can agree what these are.

The differences between climate models may point to general model improvements for which there is plenty of room.

As well as humanitarian benefits the project may lead to better understanding of atmospheric physics and teleconnections.

Previous work

One of the early attempts at the identification of side effects was in 2009 by Jones, Haywood and Boucher of the Hadley Centre [8]. They picked three regions representing only 3.3% of the world ocean area and raised the concentration of cloud condensation nuclei to 375 per cubic centimetre everywhere in the regions from initial values of 50 to 300. The regions were off California, off Peru and off Angola / Namibia. These are labelled NP for North Pacific, SP for South Pacific and SA for south Atlantic in figure 1, top left. These areas usually have good conditions for cloud cover and solar input. Parts close to the coast have rather high nuclei concentrations. They are good but by no means the only suitable sites for cloud spraying. The increased nuclei concentration was held steady regardless of summer/winter, monsoons or the phase of the el Nino Southern oscillation. The resulting global cooling for the separate regions was 0.45, 0.52, and 0.34 watts per square metre giving a mean annual total of 1.31 watts per square metre. However if all of the regions sprayed together all of the time the 3.3% of ocean area would cool a little less, 0.97 watts per square metre. Even the lower amount of cooling would be a substantial fraction of the widely-accepted increase of 1.6 watts per square metre since preindustrial times.

Present global climate models are good at predicting temperature but are less accurate for precipitation, ice and snow. They cannot predict cloud cover, hurricanes or flood events. Climate change with no geo-engineering is already producing extremes floods in Pakistan and Queensland with droughts in South Australia, the Horn of Africa and the United States.

The Jones, Hayward and Boucher results show that albedo control can both increase and reduce precipitation far from the spray source, even in the opposite hemisphere. Spray from California (NP) shown in the top right of the figure can nearly double rainfall in South Australia. Angola/Namibia (SA) give a useful increase, lower left, in Ethiopia, Sudan and the Horn of Africa. But most attention was given to the 15% reduction over the Amazon. Perhaps Brazilians watching recent television footage of dying children in Ethiopia and Sudan would be glad to have their own rainfall reduced to 2000 mm a year when necessary.

Figure 1. The separate effects of the spray regions in Jones Haywood and Boucher 2009.

Figure 2. The combined effect of all three spray sources of figure 1. This slide appeared on its own with no indication of the spray regions used and could imply that Amazon drying is the result of spray anywhere.
If all three regions in figure 1 spray simultaneously and continuously we get the result in figure 2. The combination is not the sum of the parts. The reduction in the Amazon is there but less marked. There are useful increases in Australia and in the Horn of Africa. The reduction in precipitation in South West Africa caused by the South Atlantic spray region has vanished. Jones et al. did not test other source positions, spray rates or seasonal variations relative to the monsoons.

More recent work by Gadian and Parkes at Leeds [9] used the coded modulation of the nuclei concentration of 89 spray sources of roughly equal area round all the oceans. They then correlated the individual sequences with the resulting weather records round the world. The modulation was done by multiplying or dividing initial nuclei concentration values by a factor chosen initially as 1.5. Because of the logarithmic behaviour of the Twomey equation this alternation should have had a low overall effect. The factor of 1.5 is a much weaker stimulus than an increase of 50 to 375 nuclei per cubic centimetre which would increase reflectivity by 0.168.

Figure 3. An example of the effect of all spray regions on two places in the Amazon. Drying from spray in the South Atlantic as predicted by the Hadley Centre is evident but could easily be countered by spray from many other regions, especially from south of the Aleutians.
The results in figure 3 show that, as well as the spray sources used by Jones et al., there are many other spray sources which will either increase or reduce precipitation in the Amazon. The two regions in the Amazon basin are shown black. Red shows sites which would increase precipitation at the black site and blue shows a reduction. The Amazon increases from the red spray sources off California and Peru are in agreement with the 2009 Hadley Centre result. The strongest blue in (b) off Namibia and the weaker blue off Angola in (a) are also in agreement. But the great majority of spray sites, particularly the one in (b) off Recife, show increases in the Amazon precipitation. The analysis will show maps like these for every observing station of interest. This could amount to many hundred maps depending on the resolving power of the climate models.

It is also possible to show the transfer function of each spray site on target regions on land all round the world. Figure 4 shows a sweep of spray sources along the east sides of the North and South Atlantic. There are alternating effects in South America and Australia. Spraying between the English Channel and Labrador has little effect in the Amazon or Australia but the next region south increases rain in both. The Atlantic coast off Mauritania further increases Amazon precipitation, gives weaker precipitation in eastern Australia but dries the west. A block from Liberia to Nigeria has little effect on either the Amazon or Australia but is close to where hurricanes begin. Angola confirms the Hadley centre drying of the south Amazon but not the north. Namibia reverses this. Spray off the Cape of Good Hope increases rainfall both regions of the Amazon but the effect fades as we spray from further south. Spray further south increase rain in the Indian sub-continent and Japan.

The maximum swings are 0.0006 mm per day for each percentage variation of the initial nuclei concentration. This means that for the 100% nuclei increase needed to give a reflectivity increase of 0.057, the annual precipitation change would be 0.0006 x 365 x 100 mm = 21.9 mm per year. This is much smaller than precipitation changes indicated by the Hadley Centre but the size of individual spray regions is somewhat lower. The Hadley Centre increase from 50 per cubic centimetre in a clean spray region to 375 is a much stronger stimulus by a factor of 15 and a reflectivity increase of 0.168. The offshore edge of the Hadley test regions would have presented an impossibly high slope of nuclei concentration. Perhaps climate systems react just as badly to sharp changes as engineering components under stress.

The full Parkes thesis can be downloaded from [9]

Figure 4. A sweep of spray regions along the east side of North and South Atlantic show cyclical effects on precipitation in South America and Australia. Ben Parkes’ work provides 89 such maps.
The symbols in figure 4 show the scatter of precipitation results from 8 runs with different sequences from 89 spray sites on the Arabian region. Blue bars show standard deviations. A low scatter implies reliable operation of the technique but is not universal. While the general trend is towards slightly more precipitation, there are changes in both directions with less scatter in the wetter direction.

Figure 5. If the results of perturbations from separate runs with different code sequences show a large scatter we can deduce that the technique is not working well for that combination of source and observing station.

Work programme

Because of the poor representation of precipitation in global climate models and in the absence of any better prediction method, we want to use a multiple approach with at least five different climate models driven by different research groups attempting the same jointly agreed objectives but with some freedom to follow interesting results. Suggestions for the central questions which should be tackled by all groups are as follows. They must be debated and approved but then adhered to.

Correlation lag. The changes to weather are not immediate so we should include a time lag between the release and the autocorrelation period. There may also be several time lags with different durations. We can make good estimates by choosing a plausible guess for the response period, driving all or a subset of spray sources in unison to add a sinusoidal component at that period to the nuclei concentration, running the climate model, subtracting the mean offset at each observing station round the world and multiplying the mean response by the sine and cosine signals. This will produce two offset means. The tangent of the phase lag of the response at each observing station will be the cosine offset divided by the sine offset. Repeating the process for various periods will allow the choice of correlation lag for each observing station. The amplitude and phase of the response as a function for period will give an interesting insight into the important climate system processes but does not allow the separation of effects from individual spray sources as is possible with coded modulation.

Coded modulation sequences. Random number generators can, by chance, produce short groups with abnormal auto-correlation. Andrew Jarvis at Lancaster can give sequences without these. When God made random sequences He made a great many so we can all use different ones but it will be interesting to compare results of the same sets of sequences in different models.

Change-over period. The encoding sequence can be seen as a series of coin tosses. Each toss decides whether the spray/not spray mode should be reversed or left alone. If the coin is tossed too frequently then the weather system will not have time to respond. But, if the intervals are too long, the length of the computer run needed to get a reasonably low scatter will be expensive. Perhaps initially the very shortest change-over period should be about the time for which reliable forecasts can be made, perhaps ten days. At each possible change-over period there will be a 50% chance of no change and a 25% chance of getting three ‘no-change’ events in a row and so on. Carbon emissions vary over a weekly cycle and the release of decay gases and di-methyl sulphide from seaweed can be related to the 28 day tidal cycle so we must avoid being phase-locked to these periods. Parkes used a change-over period of 10 days for computational efficiency and a case can be made for 20 days. We should later extend the changeover period but not to the point where too many changes spread across a monsoon period.

Monsoon season. All the work so far has used continuous spray through the year. It might occur to even a naïve engineering person that the monsoon seasons could possibly have an effect on patterns of precipitation and evaporation. This means that we should do separate correlations and calculate separate transfer functions according to the monsoon phase. If the technique shows promise and computing time is available we may be able to resolve transfer functions down to monthly levels provided that we can get resources to allow the use of high resolution models.

Spray amplitude. The susceptibility of an ocean spray region is a function of low cloud, clean air incoming solar energy and perhaps wind to drive spray vessels and disperse spray. Large spray volumes in what initially appear to be regions of high susceptibility will reduce that susceptibility. A lower dose over a wider region will be more effective. Multiplying and dividing the initial nuclei concentration value by 1.5 was quite small but we do not know that it is the best choice. A sweep over multiplying and dividing amplitudes from 1.25, 1.5, 2, 3 and 4.5 will help us choose the best spray amplitude(s) for later work.

Spray asymmetry. The Twomey results can be condensed into an equation which says that the change in reflectivity is 1/12 of the natural log of the ratio of nuclei concentration. The log term led to the decision to multiply and divide initial nuclei concentration values by a constant rather than by the usual addition of some chosen amount. It was intended to cancel the mean thermal effects in other regions. However it may be that the multiplier should not be exactly equal to the divider. We need to establish the best numbers to use for the lowest external interference so as to minimise interference between regions. A possible method might be to use results of the sinusoidal modulation. Any departure from a sinusoidal wave form produces harmonics which can be detected by multiplying the signal minus its mean by the sine and cosine of 2, 3, 4 etc. times the fundamental.

Spray concentration profile. While time constraints forced Parkes to use blocks of spray with sharp edges it would be more realistic to have smoother variations of nuclei concentration, perhaps with the bell-shaped Gaussian concentration.

Number and position of spray sources. The Parkes choice of 89 spray regions was not made with any great confidence. We wanted at least two across the narrow section of the Atlantic. Parkes started with equal areas but then divided them round the Caribbean and either side of Iceland because of the current patterns. Some climate models show strange alterations either side of the equator in the Pacific. There is no need for spray regions to have equal areas provided that we can give each an appropriate weighting. There is no need for everyone to use the same regions provided that research result maps (discussed later) can give a common presentation. Individual selections should be encouraged and results merged to avoid blocky results.

Regions might be merged if there is little difference between their susceptibilities or divided if differences between adjacent neighbours are large provided that the spray regions are large enough to produce a consistent forcing over several grid points.

Region grouping. It is well known that climate patterns all over the world are affected by temperature differences across the South Pacific, not always to advantage. It will be interesting to drive the cloud nuclei concentration differentially either side of the Pacific with code sequences of each side in unison in a number of coherent ways. Two obvious ones are first an equal 50/50 east/west split with a sharp divide, secondly a linear ramp with concentration depending on distance either side of the midline and thirdly a blend of positive and negative Gaussian distributions. Other Boolean combinations of spray regions can be chosen but with the risk that this could lead to a combinatorial explosion of possibilities and so we need careful planning.

Tactical spraying. There is no need for spray rates to be preordained and fixed for a whole experiment. For example if we see that surface temperatures in the Pacific are forming an el Niño or la Niña pattern and we know the cooling power of world spray sites, even ones far from the Pacific, we can drive them so as to increase or reduce the Southern Oscillation. The spray can be in phase with the temperature anomaly or its rate of change or even at some other phase angle. The orientation of the jet-stream waves might be a powerful indicator. A force opposing change of position of a system, ie. a spring, will increase its oscillation frequency. Control engineers know that very small amounts of damping (a force opposing velocity) or its opposite, can have very large effects on the growth or decay of oscillations. We like error sensors and actuators with a high frequency-response and low phase-shift. Tropospheric cloud albedo control has an attractively rapid response – a few days compared with stratospheric sulphur at low latitudes which is about two years. With sufficiently high resolution we may also detect early signs of hurricane formation.

Ganging up. We may learn something about the climate system by using independent spray patterns to identify all the spray regions which have the same effect on one observation station, such as drying Queensland, and then driving then in unison. We then reverse the selection to all the spray regions which increase Queensland precipitation.

Map projections. The site http://egsc.usgs.gov/isb/pubs/MapProjections/projections.html gives a useful selection and explanation of map projections. All projections of a solid globe to a flat plane involve some distortions but we can choose between distorting area, direction, shape or distances at various places in the map. The Mercator projection is very common but produces gross distortion of east/west distances and areas at the high latitudes which are now seen to be of very great importance to climate change. For polar areas the Lambert azimuthal equal-area projection looks best. We can tilt this projection in other directions so that several images can show the whole world with acceptable distortion. The obvious starting one would be six Lambert azimuthal views, two from the poles and four from the equator at longitudes of 0, 90, 180 and 270 degrees and an option to set any other latitude and longitude for any other view. It can be very useful to have a transparent layer of one parameter laid over another but this will need coordination of page layout. Six 90 mm diameter circles on a 100 mm pitch can fit neatly on one page of A4 or letter page with room for arrows to adjacent balloons. If necessary we can fit 12 on an A3. A single 180 mm circle can be used to show finer detail. The modelling teams must consider the question carefully, come to a joint view and then stick to the common decision and page scale.

Solid modelling packages (e.g. SolidWorks) are increasingly common for engineering design and several offer free viewing software to let customers spin images of engineering components about any axis. A spinning image can give a good presentation of complex three-dimensional shapes. It should be possible to modify software to give surface colours with 10 saturation levels and text to regions of a spinning sphere.

Mapping contours. Result maps need to show the magnitude and slope of at least temperature, precipitation, evaporation ice and snow cover. While a continuous rainbow spectrum looks beautiful and gives a superficial impression of work done it is almost useless at providing any numerical information beyond the position of a peak. There are some meteorological result maps which have colour allocations that are particularly unhelpful, for example the one below.

Figure 6. How not to display the results of a climate model. The lead author of the paper from which this figure was taken agrees with me but was unable to challenge official policy. No names no pack-drill. Result format for this project may be dictatorial but will be more intelligent.
The area of ‘no change’ is between the lighter buff colour and the darker green. It covers a large fraction of the map. The polarity of the contour gradient is not obvious where light green moves to cyan or the darker buff moves to orange. Light green is a stronger effect than dark green. Numbers on the colour code bar refer to the borders not the middle of contours. Readers may confuse this map for precipitation with another map for temperature which uses the same colour set.

The right presentation of results can reveal the reasons for the most peculiar phenomena. We must make it as quick and as easy as possible for lazy, tired, non-technical readers to see effects with the minimum of mental decoding effort even when they are looking at a great many different maps.

The first requirement is that areas with effects that are below the level of statistical significance or the middle of the range should be white. Either side of this region there should be just two colours with increasing saturation. Red and blue would be intuitive for temperature with green and brown for river runoff. The male human eye can reliably distinguish 10 saturation levels provided regions are in contact with sharp edges. (Females have higher discrimination.) This gives a range of 20 steps (more than most result maps) plus a white central zero for the mean or the anomaly reference. The steps give an obvious direction of gradients. Adults, babies, birds and many animals can count up to five in an instant ‘analogue’ way. If we have thin black contour lines between the lowest five saturation steps and thin white lines between each of the top five colours we can avoid getting lost. We can also include black or white text numbers to show the contour value and total area of the contour region. An example is shown below.


Astronomers developed a very powerful technique to detect changes in the position or brightness of astronomical objects. Two images of star fields containing thousands of objects, taken at different times but with exactly the same magnification, would be shown alternately at intervals of about one second. A change in any one of them would be immediately apparent. We can adapt this for use with PowerPoint images to detect small differences in maps of model results provided that we can standardise the presentation format across all groups. We can also flicker through a sweep of many small changes in time or nuclei concentration.

Reports should have verbose comments and complete meta-data close to each map with minimum risk of confusion between them. This means frequent repetition and no jumps to other pages, or even other journals as is sometimes done. The clarity of caption wording should be tested by naive readers, rather than the intimidatory style of many journals.

Results can be presented as absolute values or as anomalies from some agreed reference baseline. We must agree on a small selection of base lines such as preindustrial, 1960-90, present, x 2 preindustrial CO2 or one of the, now discredited, IPPC scenarios. We must also be able to show instantly the differences between sets of results from different codes or institutions such as Pacific North-Western minus Hadley Centre. We must be able to combine results with various weightings from different teams. This will require an agreement between the teams of what the format should be, followed by their obedience to the agreement. It will be important to get advice from good information technology experts.

Blockiness. Because of pressure of time the Parkes thesis results were presented as blocks with sharp edges which are unusual in meteorology except for either sides of mountain ranges or places like the Cape of Good Hope. We should agree on a method to produce smoothly blended curves for both spray concentration regions and results.

Naming of sea areas. We must make it easy for people to know which of many possible spray regions are being discussed even if they are not the same as the original Parkes 89. One way is to pick a spot at the centroid of an ocean and then give the bearing and distance of a spray region under discussion in terms of the bearing and distance from the ocean centroid. Two digits are enough to identify runways at airports and most regions will be larger than 100 kilometres or a few model grid points so, for example, we could use a description such as South Pacific 18, 30 for a spray region 3000 kilometres south of the ocean centroid.

Numerical data. If we want daily results of 4 parameters affected by 100 spray regions for 500 different observing stations over 20 years with two-byte precision we will have to access nearly a Terabyte of information. Requirements are unlikely to shrink. We want this to be made freely accessible to anyone. We need verbose and intuitive labels and selection filters with same look and feel from all modelling groups. Subsets should be available in a widely used format, agreed by all teams such as netCDF and GrADS. People should normally supply numerical results in a common, agreed and widely-used format. If other formats have to be used then the teams should provide conversion software or do the conversions themselves on request.

Carbon dioxide variation. We should first test the technique with an agreed level of atmospheric greenhouse gases. If we can establish confidence in the coded modulation technique we can later experiment with changes to gas concentrations. Obvious ones are pre-industrial, double pre-industrial, ramped rises at various rates, methane burps and even the effects of plausible rates of CO2 removal. However access to present real observations will be useful and so there is a strong case for using present day gas concentrations unless there is a sudden need for work on methane burps.

Political information. Models will be able to produce results of several climate parameters of the effect of all the spray regions at places all round the world. There are many ways in which we could select target regions. One obvious one is the present political boundaries of 193 UN Member States. If a climate model has a resolution of one degree each cell has a side of 111 kilometres. It takes about eight points to draw a convincing sine wave so the size of result contour will be larger than the smaller countries. This means that some of the smallest ones will have to be grouped. This could be a matter requiring some delicacy. For large or elongated countries we can subdivide the area such as either side of a mountain range or north and south for countries in the Sahel. This would allow each country to choose which spray regions and times would give it the maximum benefit with the least dis-benefit to others. It might then be possible to understand and maximise the winner-to-loser ratio and even to decide on compensation. It is defeatist to assume that the outcomes will inevitably be unfavourable. The results of any pair of parameters predicted by each climate model for each country can be shown by plotting the model name on a map with, say, the vertical coordinate being temperature and the horizontal coordinate being precipitation. A close clustering of results from different models will add confidence. We must resist the temptation to place models in rank order. The objective should be model improvement and good science can come by sometimes testing opposites.

Specific Questions

There is a grave risk of a combinatorial explosion suppressing the detection of differences between climate models and so initially we must agree on as many test conditions as possible. The following are suggestions for debate.

  • What spray rates, change-over periods, concentration profiles and correlation delays should be used for commonly-agreed experiments?
  • What level of scatter will still allow us to draw useful conclusions?
  • What level of model resolution should be used?
  • How does scatter vary with the length of run?
  • How does scatter vary with the size of target area?
  • Do we need to merge target areas?
  • How does scatter vary with spray source and observing station?
  • What spray regions, spray rates and spray seasons will produce unacceptable changes?
  • Can scatter be low enough to allow seasonal or monthly transfer functions?
  • How far does the Twomey log equation for nuclei-concentration to change-of-reflectivity hold?
  • What ratio of multiplier to divider will minimise interference between spray sources?
  • Negative modulations are easy in a computer model but less so in the real world. How does susceptibility vary if the modulation is asymmetric or is only positive?
  • How does the susceptibility for temperature, precipitation and ice cover vary with the amplitude of the perturbation?
  • Will tactical variations based on day-to-day observations be useful for hurricanes and precipitation adjustment in both directions?
  • Are there large winner-to-loser ratios?
  • Can overall winner-to-loser ratios be minimized?
  • What other experiments do you suggest?
  • What is the probability that this project would improve the reliability of climate models?


Milestones and Deliverables


  • Agreement on result presentation, data format and low-level common analysis software packages.
  • Circulation and analysis of the existing Ben Parkes results.
  • Agreement on target parameters such as, temperature, precipitation, evaporation, ice, snow-line, vegetation and CO2 level.
  • Agreement between teams on timescales for deliverables.
  • Measurement of the phase and amplitude response to allow choices of correlation lags.
  • Maps of spray site susceptibility, defined as the annual change of each result parameter per unit of spray volume.
  • As above with spraying adjusted with a selection of correlations linked to the monsoon seasons. Even if the computer models cannot detect the onset of a monsoon we can use historic records to pick dates.
  • Investigation of tactical spray rate variation.
  • Results for groups of spray regions working in unison or subtle harmony especially with Trans-Pacific amplification and attenuation of el Niño / la Niña oscillations.
  • Design of a world-wide spray plan to cool the planet with the minimum winner/loser ratio.
  • Identification of the strengths and weaknesses of the various climate models leading to suggestions for improvement.


Chaos

Objectors to cloud albedo control have argued that the climate system is chaotic and so nothing can be done to direct it. There have been a great many phenomena such as planetary motions, chemical reactions, the incidence of disease and the motions of sea waves which were thought to be chaotic by the leading thinkers of the day. But Kepler showed that elliptical planetary orbits followed rules more precise than any man-made machinery. Mendeleev produced his periodic table and was able to predict the properties of hitherto unknown elements. Pasteur developed germ theory. Test tanks can now produce complex sea states with repeatability of a few parts per thousand. An oscilloscope signal from any backplane connector of a computer appears to be entirely random string of zeros and ones but is in fact one of the most highly defined sequences that we can produce.

A favourite demonstration of chaotic behaviour uses the fall of sheets of paper from above the demonstrator’s head. The smallest increase of the angle of incidence between the paper and the apparent airflow produces a pitching moment to increase its value up to the moment of stall. Sheets will be scattered over a wide area. But if a sheets of paper is folded in the form of a paper dart to increase stiffness, and a weight is added to the nose then the area enclosing its falling positions is greatly reduced. Clearly the magnitude of chaos is variable and can be affected by small changes to engineering design. The scatter could be further reduced if the falling item was fitted with optical systems driving control surfaces. We could call it a GBU 12 Paveway bomb which has an accuracy of about one metre despite chaotically random cross winds. Similarly we could fit video cameras and hinge actuators to the nails of Galton’s bagatelle board.

There may really be systems such as turbulence and subatomic physics which are genuinely chaotic. But if we believe that systems which we cannot at present understand are chaotic then we remove completely our chances of scientific discovery. The common factor is that very small changes, like the angle of incidence of a sheet of paper, are amplified. This means that small amount of input energy applied intelligently can produce large changes in output energy. That is just what we need to control the very large amounts of energy in the planetary climate. Apparent chaos implies the possibility of success. Coded modulations could give valuable insights into the climate system as well as saving world food supplies.

Conclusions

The world can be compared to a vehicle with free-castor wheels which is rolling down a hill with increasing gradient. A few passengers are warning that there may be a cliff edge somewhere ahead. Some are suggesting that there might just be time to design and fit brakes, steering and even a reverse gear. Others advise that the slope ahead might level off and so brakes and steering would be a waste of money. Some objectors complain that the passengers could never agree on the best direction to steer. Some are close to claiming that God wants humanity to drive over the cliff edge and that it is wrong to interfere with divine intentions.

We could also consider the climate system as a piano in which the spray regions are the keys, some black some white, on which a wide number of pleasant (or less unpleasant) tunes could be played if a pianist knew when and how hard to strike each key.

References

1. Latham J. 1990 Control of global warming? Nature vol no 6291 pp 347 339-340.

2. Twomey, S. 1977 Influence of pollution on the short-wave albedo of clouds.
J. Atmos. Sci. 34, 1149–1152. doi:10.1175/1520-0469

3. Schwartz, S. E. & Slingo, A. 1996 Enhanced shortwave radiative forcing due to anthropogenic aerosols. In Clouds chemistry and climate (eds P. Crutzen & V. Ramanathan), pp. 191–236. Heidelberg, Germany: Springer.

4. Latham J, Rasch P, Chen C-C, Kettles L, Gadian A, Gettelman A, Morrison H, Bower K, Choularton T. 2008.
Global temperature stabilization via controlled albedo enhancement of low-level maritime clouds. Philosophical Transactions of the Royal Society A 366(1882): 3969–3987.

5. Rasch PJ , Latham J, Chen CC, 2009. Geoengineering by cloud seeding: influence on sea ice and climate system. Environ. Res. Lett. 4 (2009) 045112 (8pp) doi: 10.1088/1748-9326/4/4/045112.

6. Latham J, Bower K, Choularton T, Coe H, Connelly P, Cooper G, Craft T, Foster J, Gadian A, Galbraith L, Iacovides H, Johnston D, Launder B, Leslie B, Meyer J, Neukermans A, Ormond B, Parkes B, Rasch P, Rush J, Salter S, Stevenson T, Wang H, Wang Q, Wood R. 2012. Marine cloud brightening. Philosophical Transactions of the Royal Society A 370: 4217–4262, doi:10.1098/rsta.2012.0086.

7. Salter S, Latham J, Sortino G. 2008. Sea-going hardware for the cloud albedo method of reversing global warming. Phil.Trans.Roy. Soc. A. Doi:10.1098/rsta.2008.0136

8. Jones A, Haywood J, Boucher O. 2009 Climate impacts of geoengineering marine stratocumulus clouds. Journal of Geophysical Research vol 114 D10106 . doi:10.1029/2008JD011450

9. Parkes B. Climate Impacts of Marine Cloud Brightening. 2012 Ph D Thesis University of Leeds. From http://homepages.see.leeds.ac.uk/~eebjp/thesis/